Air cooled remote condensers with axial fans ACRC-A by Maxa

• Supports. Are made from AISI 304 stainless steel, and they can be used as lifting eyebolts. The feet on the horizontal version are longer, to guarantee even air intake into the coil.
• The cowlings of the motorfans. The pipes are made with a wide bending radius to eliminate any turbulence in the airflow. This means that fan efficiency is improved and sound pressure reduced with respect to normal cowlings with low nosepieces. The plenum of the unit has been increased to give even air distribution to the coil. All motors have external rotors, with IP54 protection level.
• Heat exchanger. This is made with corrugated fins with a greater external heat exchange surface, cut with a special louver configuration to give the best external coefficient of heat exchange. The pipes have special internal helicoidal scoring, diversely from normal smooth pipes, and give greater internal heat exchange coefficient and greater exchange surface. The fins are aluminium and the pipes are made of copper. The coil circuits guarantee correct drainage of liquid, in both horizontal and vertical positions.

ACRC-A 9252÷10393 TECHNICAL FEATURES

• Frame. The units can be installed both vertically as well as horizontally, excluding the models 10283 and 10393, which function exclusively with vertical air, and are characterized by available V exchangers.
• Supports. Are made from to guarantee long life, and they can be used as lifting eyebolts. The feet on the horizontal version are longer, to guarantee even air intake into the coil.
• Axial fans consisting of three-phase motors, with triangle or star- shaped connection in various diameters depending on the model: