HRV home system series ReVent & OxyVent 90 Micro

ReVent & OxyVent 90 micro series is composed of three sizes, floor double deck version, to cover a needing of ventilation up to about 800 m3/h.

Description


CFR-90 by SIC Srl micro heat recovery units for home and commercial application are distinguished by very high heat recovery efficiency, compactness and easy maintenance as well as suitable for houses and public/commercial rooms with moderate needing of air renewal.

Heat recovery, by mean wholly polystyrene device, virtually eliminates the need of any fresh air re-heating system, while EC fans contribute to the reduction of energy consumption, although supplying high air performances.

CFR-90 micro series is composed of three sizes, floor double deck version, to cover a needing of ventilation up to about 800 m3/h.

The models of CFR-90 micro series can be supplied with a ionization system of the air called BIOXIGEN®.

This system, unique in his type, makes the air and surfsces of the machine, of the ducts and of the bordering rooms healthy and good smelling.

Technical features


• Precoated steel casing with double skin panels (15 mm min thick.) insulated by polyurethane foam; precoated steel sheet metal baseframe for floor installation;
• G4 efficiency synthetic cell filters on both air intakes; as an option and in place of G4 type, F7 compact filter in polypropylene with low air pressure drop; filter removal by front panel;
• Air-to-air counterflow polystyrene heat recovery with very high efficiency (up to 95%), already equipped with motorised by-pass device and easily removable for cleaning;
• Supply and exhaust plenum fans with plastic impeller and housing, direct driven by EC technology motors, each fully controllable by unit electronics; optimized layout of each fan section in order to reduce noise to the room;
• Plastic collars fitted with additional airtight rubber gasket; prearrangement for additional upper cooker hood connection for direct exhaust (mod. 15 excluded);
• Electronic control complete with n°03 NTC sensors inside the unit for the management of ventilation, free-cooling/free-heating mode, heat recovery defrost and possible preheating/reheating systems; possibilty of interfacing home management system by Modbus RTU protocol;
• Plug-in or remote control panel with built-in room temperature sensor.

Applications



Request information for:

HRV home system series ReVent & OxyVent 90 Micro
Accept terms and conditions of Expoclima and data protection and privacy policy of ExpoClima.