Trocellen Isocompact
TROCELLEN Isocompact is an insulating material produced with chemically cross-linked closed cell polyolefin foam.
Description
TROCELLEN ISOCOMPACT is an insulating material produced with chemically cross-linked closed cell polyolefin foam. It is developed to meet higher technical requirements, in which very high thickness thermal insulation is expected. Indicated for insulation of pipe in non heated areas, and outdoor. If installed on outdoor pipes, U.V. protection is necessary.
SLEEVES SIZE:
- Length 2.00 m;
- Thickness 30, 40, 50 mm;
- Standard diameter 1/2” (22 mm) to 4” (114mm) (thickness in compliance with law no. 10/91).
INSTALLATION
On systems under construction, sleeves can be installed in the pipes that shall not undergo further inspection. On existing systems, sleeves are cut lengthwise (on request, the sleeves are supplied cut for half their thickness, for the easier application).
For the gluing of the cut surfaces, use the specific MATIBLOCK glue, applied with a brush to both surfaces to glue; wait until the glue is dry (test by touching), then join the two parts with a slight pressure.
The fastening efficiency is proved by immediate tear resistance. With temperature between 20 and 30 °C, the solvent evaporation time is approx. 15 minutes.
SLEEVES SIZE:
- Length 2.00 m;
- Thickness 30, 40, 50 mm;
- Standard diameter 1/2” (22 mm) to 4” (114mm) (thickness in compliance with law no. 10/91).
INSTALLATION
On systems under construction, sleeves can be installed in the pipes that shall not undergo further inspection. On existing systems, sleeves are cut lengthwise (on request, the sleeves are supplied cut for half their thickness, for the easier application).
For the gluing of the cut surfaces, use the specific MATIBLOCK glue, applied with a brush to both surfaces to glue; wait until the glue is dry (test by touching), then join the two parts with a slight pressure.
The fastening efficiency is proved by immediate tear resistance. With temperature between 20 and 30 °C, the solvent evaporation time is approx. 15 minutes.