Trocellen Sleeves
TROCELLEN is an insulating material produced with chemically cross-linked closed cell polyolefin foam.
Description
TROCELLEN AL/CL1 SLEEVES
Class 1 cross linked polyolefine (polyethylene) foam laminated with protective layer of embossed metallic film.
Thermal conductivity at 40º 0.0372 W/mk (0.032 kcal/mh °C)
Water vapour diffusion coefficient (μ) > 12,000.
Does not contain CFCs.
TROCELLEN AL SLEEVES
Cross linked polyolefine (polyethylene) foam laminated with protective layer of embossed metallic film.
Thermal conductivity at 40° 0.0372 W/mk (0.032 kcal/mh °C)
Water vapour diffusion coefficient (μ) > 12,000.
Does not contain CFCs.
FITTING TROCELLEN SLEEVES
On piping being laid: the sleeves are fitted to the pipes leaving free sections which require welding or joints which need to be tested for water/air tightness.
On existing piping: this requires the sleeves to be cut lengthways and the two surfaces to be glued both spread with a thin layer of MATIBLOCK.
Wait a few minutes to allow the solvents to evaporate (both surfaces must be dry to the touch) then press the surfaces together until perfectly joined. With a temperature of 20 - 30 °C, the evaporation time is about 15 minutes.
Class 1 cross linked polyolefine (polyethylene) foam laminated with protective layer of embossed metallic film.
Thermal conductivity at 40º 0.0372 W/mk (0.032 kcal/mh °C)
Water vapour diffusion coefficient (μ) > 12,000.
Does not contain CFCs.
TROCELLEN AL SLEEVES
Cross linked polyolefine (polyethylene) foam laminated with protective layer of embossed metallic film.
Thermal conductivity at 40° 0.0372 W/mk (0.032 kcal/mh °C)
Water vapour diffusion coefficient (μ) > 12,000.
Does not contain CFCs.
FITTING TROCELLEN SLEEVES
On piping being laid: the sleeves are fitted to the pipes leaving free sections which require welding or joints which need to be tested for water/air tightness.
On existing piping: this requires the sleeves to be cut lengthways and the two surfaces to be glued both spread with a thin layer of MATIBLOCK.
Wait a few minutes to allow the solvents to evaporate (both surfaces must be dry to the touch) then press the surfaces together until perfectly joined. With a temperature of 20 - 30 °C, the evaporation time is about 15 minutes.
Technical features
Applications
Related products
Thermal insulation
Thermal insulation
Thermal insulation
Thermal insulation
Request information for:
Trocellen Sleeves
